[NNM-Club]_Программирование обработки в NX CAM

Creation Time	June 5, 2024, 12:50 a.m.
Last Access Time	June 16, 2026, 7:05 a.m.
File Size	165.6 MB
Keywords	обработки NX _Программирование в CAM NNM-Club
Total Requests	644
Total Files	185
Magnet Link	Please wait ...
	Download (Magnet Link) Play (Watch Online)

Книга.pdf 21.8 MB
Модели/turn/sim15_millturn_book_setup2_2.prt 11.6 MB
Модели/turn/sim15_millturn_book_setup2.prt 11.1 MB
Модели/turn/sim15_millturn_book_setup3.prt 7.9 MB
Модели/turn/sim15_millturn_book_setup1.prt 7.5 MB
Модели/5axis/cam_impeller_setup_1.prt 6.4 MB
Модели/5axis/cam_impeller.prt 5.9 MB
Модели/turn/NX9_Millturn_Part_setup_2fin2.prt 5.3 MB
Модели/turn/NX9_Millturn_Part_setup_2fin.prt 5.2 MB
Модели/game_remote_setup_2fin_ipw_cavity_mill.prt 5.1 MB
Модели/5axis/blade_setup_1.prt 2.9 MB
Модели/area_mill1_setup_1fin.prt 2.1 MB
Модели/surf_area7_setup_1fin.prt 2.0 MB
Модели/5axis/tilt_cylinder.prt 1.9 MB
Модели/game_remote_setup_2fin.prt 1.8 MB
Модели/game_remote_cam_final.prt 1.7 MB
Модели/5axis/blade2.prt 1.7 MB
Модели/Floor_wall_multiaxis_setup_1.prt 1.7 MB
Модели/surf_area7_setup_2fin.prt 1.7 MB
Модели/new_drilling.prt 1.6 MB
Модели/contour_multilevel.prt 1.6 MB
Модели/5axis/cyl_part_finishing_1_setup_1fin.prt 1.5 MB
Модели/5axis/gear.prt 1.5 MB
Модели/ipw_Workpart_setup_1fin.prt 1.2 MB
Модели/5axis/tilt_cylinder_setup_1fin.prt 1.2 MB
Модели/surf_area7_setup_2.prt 1.2 MB
Модели/streamline_2fin.prt 1.1 MB
Модели/game_remote.prt 1.1 MB
Модели/ipw_Workpart_setup_1.prt 1.1 MB
Модели/hole_mill1.prt 1.1 MB
Модели/synchr_mould_core_new.prt 1.1 MB
Модели/streamline_2.prt 1.0 MB
Модели/hole_mill1_setup_1fin.prt 984.0 KB
Модели/fbm/feature_teaching_fin.prt 976.0 KB
Модели/form_mold_setup_2.prt 968.0 KB
Модели/area_mill1_setup_2fin.prt 912.0 KB
Модели/fbm/feature_teaching.prt 908.0 KB
Модели/game_remote_setup_2.prt 904.0 KB
Модели/5axis/tilt_pocket.prt 896.0 KB
Модели/area_mill1_setup_2.prt 868.0 KB
Модели/head_holes.prt 852.0 KB
Модели/synchr_mould_core_setup_1fin.prt 840.0 KB
Модели/synchr_mould_core_setup_3.prt 828.0 KB
Модели/form_mold.prt 740.0 KB
Модели/game_remote_setup_1.prt 720.0 KB
Модели/5axis/zl_multi_axis_2_setup_pav.prt 716.0 KB
Модели/surf_area7.prt 668.0 KB
Модели/game_remote_setup_1fin.prt 664.0 KB
Модели/ipw_transfer_setup_2.prt 656.0 KB
Модели/Floor_wall_Mil_exl.prt 624.0 KB
Модели/Floor_wall_Mil_exl_setup_1fin.prt 592.0 KB
Модели/5axis/srf_area_11.prt 576.0 KB
Модели/fbm/fbm_pav_ekb1_setup_2fin.prt 576.0 KB
Модели/5axis/ufd_vap_case1.prt 568.0 KB
Модели/facing_setup2fin.prt 548.0 KB
Модели/5axis/zl_multi_axis_2.prt 544.0 KB
Модели/5axis/varstream_setup_1.prt 536.0 KB
Модели/ipw_valve_adapter.prt 528.0 KB
Модели/form_mold_setup_1.prt 520.0 KB
Модели/fbm/fbm_pav_ekb1_with_TP_nx8.prt 516.0 KB
Модели/synchr_mould_core_modif.prt 516.0 KB
Модели/ipw_transfer.prt 478.0 KB
Модели/top_clamp.prt 473.0 KB
Модели/Floor_wall_Mil_exl_setup_1.prt 445.0 KB
Модели/synchr_mould_core.prt 439.0 KB
Модели/5axis/fl1.prt 437.0 KB
Модели/Floor_wall_Mil_exl_setup_2fin.prt 433.5 KB
Модели/5axis/cont_prof_gaps_setup_1fin.prt 431.5 KB
Модели/new_drilling_setup_1fin.prt 421.5 KB
Модели/5axis/vx_0mm.prt 408.5 KB
Модели/area_mill1_setup_1.prt 395.5 KB
Модели/facing.prt 395.0 KB
Модели/post_test_fbm_setup_1.prt 388.0 KB
Модели/surf_area7_setup_1.prt 387.5 KB
Модели/5axis/vx_0mm_setup_1fin.prt 382.0 KB
Модели/fbm/fbm_pav_ekb1.prt 369.0 KB
Модели/turn/NX9_Millturn_Part.prt 367.5 KB
Модели/head_holes_setup_2fin.prt 363.5 KB
Модели/turn/NX9_Turn_Part.prt 362.0 KB
Модели/face_milling_undercut.prt 353.0 KB
Модели/test_floor_wall1.prt 348.5 KB
Модели/ipw_transfer_setup_1.prt 346.0 KB
Модели/area_mill1.prt 340.0 KB
Модели/5axis/gear_setup_1.prt 328.0 KB
Модели/head_holes_setup_2.prt 326.0 KB
Модели/area_mill2_setup_1fin.prt 323.0 KB
Модели/test_floor_wall1_setup_1fin.prt 321.5 KB
Модели/5axis/cont_ring_height.prt 316.5 KB
Модели/synchr_mould_core_new.stp 316.0 KB
Модели/turn/NX9_Turn_Part_setup_1.prt 309.5 KB
Модели/head_holes_setup_1fin.prt 308.5 KB
Модели/5axis/tilt_cylinder_setup_1.prt 301.0 KB
Модели/drilling_on_sphere_1fin.prt 296.5 KB
Модели/probing/probe_mill_test.prt 295.5 KB
Модели/5axis/blade.prt 294.5 KB
Модели/5axis/cont_prof_gaps.prt 291.0 KB
Модели/Floor_wall_multiaxis.prt 290.5 KB
Модели/drilling_on_sphere_1.prt 286.0 KB
Модели/5axis/ufd_vap_case1_setup_1fin.prt 279.0 KB
Модели/CONTOUR_AREA_path.gif 277.2 KB
Модели/fbm/fbm_pav_ekb1_setup_2.prt 273.0 KB
Модели/side_slot.prt 270.5 KB
Модели/5axis/fl1_setup_2mt.prt 265.5 KB
Модели/face_milling_undercut_setup_2fin.prt 264.5 KB
Модели/contour_undercut.prt 263.5 KB
Модели/area_mill1_setup_2fin.gif 263.1 KB
Модели/side_slot_setup_1fin.prt 258.5 KB
Модели/STREAMLINE_20_40_path.gif 257.1 KB
Модели/STREAMLINE_path.gif 257.0 KB
Модели/turn/NX9_Millturn_Part_setup_2.prt 252.5 KB
Модели/area_mill2_setup_1.prt 250.5 KB
Модели/synchr_mould_core_setup_2fin.prt 248.0 KB
Модели/STREAMLINE_99PERCENT_path.gif 242.8 KB
Модели/STREAMLINE_HELICAL_path.gif 242.3 KB
Модели/core_new.x_t 240.3 KB
Модели/5axis/fl1_setup_1.prt 240.0 KB
Модели/prihvat1_setup_1fin.prt 233.5 KB
Модели/new_drilling_setup_1.prt 230.5 KB
Модели/probing/probe_mill_setup1fin.prt 221.0 KB
Модели/turn/NX9_Millturn_Part_setup_1.prt 209.0 KB
Модели/area_mill2.prt 201.0 KB
Модели/planar_cont1fin.prt 196.0 KB
Модели/face_milling_undercut_setup_2.prt 194.0 KB
Модели/5axis/cont_prof_gaps_setup_1.prt 191.0 KB
Модели/5axis/ufd_vap_case1_setup_1.prt 188.5 KB
Модели/probing/probe_mill_setup1.prt 188.0 KB
Модели/facing_setup1fin.prt 180.5 KB
Модели/synchr_mould_core_setup_2.prt 176.5 KB
Модели/5axis/cyl_part_finishing_1.prt 160.5 KB
Модели/post_test_setup_1fin.prt 158.0 KB
Модели/top_clamp_setup_1fin.prt 157.0 KB
Модели/Floor_wall_Mil_exl_setup_2.prt 153.5 KB
Модели/post_test_setup_1.prt 150.0 KB
Модели/hole_mill1_setup_1.prt 144.0 KB
Модели/head_holes_setup_1.prt 143.0 KB
Модели/face_milling_undercut_setup_1.prt 142.5 KB
Модели/post_test.prt 142.5 KB
Модели/5axis/vx_0mm_setup_1.prt 141.5 KB
Модели/top_clamp_setup_1.prt 140.0 KB
Модели/prihvat1_setup_1.prt 136.5 KB
Модели/side_slot_setup_1.prt 135.5 KB
Модели/prihvat1.prt 134.0 KB
Модели/planar_cont1.prt 130.5 KB
Модели/5axis/varstream.prt 128.5 KB
Модели/facing_setup1.prt 126.0 KB
Модели/probing/probe_calibration_sphere.prt 119.5 KB
Модели/face_milling_undercut_setup_1fin.prt 118.5 KB
Модели/test_floor_wall1_setup_1.prt 117.5 KB
Модели/contour_multilevel.mpf 112.8 KB
Модели/5axis/impeller_blank1.prt 112.5 KB
Модели/floor_wall_cyl1.prt 107.5 KB
Модели/ipw_tombstone_fixture.prt 104.0 KB
Модели/5axis/cyl_part_finishing_1_setup_1.prt 100.0 KB
Модели/ipw_blockl1.prt 96.5 KB
Модели/turn/NX9_turnmill_blank1.prt 96.5 KB
Модели/turn/NX9_Turn_Blank.prt 96.0 KB
Модели/fix2.prt 82.5 KB
Модели/probing/probe_mill_test_blank.prt 81.5 KB
Модели/fix1.prt 81.0 KB
Модели/ipw_blank_stk.prt 79.5 KB
Модели/area_mill1_setup_2fin.html 55.7 KB
Модели/game_remote_setup_2fin.mpf 14.5 KB
Модели/game_remote_setup_2.mpf 14.5 KB
Модели/Book1_10074_image003.png 12.8 KB
Модели/game_remote_setup_2.ptp 9.9 KB
Модели/Book1_10074_image001.png 5.9 KB
Модели/Book1_10074_image004.gif 2.8 KB
Модели/5axis/fl1_setup_2mt.mpf 2.8 KB
Модели/Book1_10074_image002.gif 1.6 KB
Модели/head_holes_setup_1.mpf 1.6 KB
Модели/turn/NX9_Millturn_Part_setup_2.ptp 1.6 KB
Модели/game_remote_setup_2.h 1.0 KB
Модели/cse_files/subprog/to_ini.ini.bck 936 bytes
Модели/ext_nc2a.txt 573 bytes
Модели/ext_nc2.txt 567 bytes
Модели/turn/sim15_millturn_book_setup2.mpf 549 bytes
Модели/probing/probe_mill_setup1.ptp 381 bytes
Модели/turn/cse_files/subprog/to_ini_2.ini 335 bytes
Модели/turn/cse_files/subprog/to_ini_2.ini.bck 335 bytes
Модели/head_holes_setup_1.ptp 296 bytes
Модели/cse_files/subprog/to_ini.ini 270 bytes
Модели/probing/probe_mill_setup1fin.ptp 207 bytes
Модели/turn/cse_files/subprog/to_ini_1.ini 125 bytes
Модели/turn/cse_files/subprog/to_ini_1.ini.bck 125 bytes
Модели/turn/cse_files/subprog/to_ini.ini.bck 0 bytes

[NNM-Club]_Программирование обработки в NX CAM

File List

Download Torrent

Related Resources

Copyright Infringement